Quick drying, quick indication
High sensibility
Non-poison, harmless
Solvent remove
 Features:
     Quick drying, quick indication.
     Solvent removable, or water removing first and solvent removing afterward.
     Low content of fluorine, chloride and sulfur. Suitable for surface flaw detection of austenitic stainless steel.
     High sensibility.
     Non-poison, harmless, without strong stimulation order organic solvent
     Imported COSTER valve and nozzle. The luster well-distributed and covered widely on work piece. The nozzle of P,R.D can be changed to each other.
Application:
It can be widely used in chemical industry, shipping industry, power industry, aviation industry, engineering, metallurgical industry, engineering, metallurgical industry, automobile, petrol industry, railway, etc.
Packing:
    Aerosol can(500ml): 6can/set
    18L liter can(bulk packing)
Technic parameter:

	Penetrant	Remover	Developer
Appearance	Dark-red liquid	Colorless transparent liquid	White suspension
Specific graviy	0.88±0.01	0.69±0.01	0.81±0.01
Corrosive Properties(g/ml)	No evidence of corrosion
Flash pint /’’C	25	-6	-6
Washabilty	Easy to wash
Sensitivity	≥level 1	To be used with DPT-5 penetrant
Stability	Qualified
Viscosity/mm2/s	3.8±0.3	1.51	1.03
Re-dispersing property	-	-	Easy to disperse

Usuage:
Clean the workpiece surface with Remover.
Spray Penetrant on the workpiece surface and keep wet of 5-10 minutes.
Clean Penetrant on the workpiece surface with Remover.
Shake Developer until well-distributed, then spray it from 150~300mm.
Flaws will be revealed.
Remove developer with Remover.